Audio Technica AE3000
Audio Technica AE3000 Description:
The Artist Elite AE3000 delivers supreme performance at extreme SPLs.
This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound.
Its low-profile side-address design with tapered grille allows for optimal positioning.
Audio Technica AE3000 Features:
- Excels in high-SPL applications
- Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
- Low-profile side-address design with tapered grille allows optimal positioning of element vis-a-vis sound source
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Robust design for enduring dependability on the road
- Integral 80 Hz HPF switch and 10 dB pad
Audio Technica AE3000 Specifications:
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 20-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -43 dB (7.0 mV) re 1V at 1 Pa
- IMPEDANCE 100 ohms
- MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.;
- 158 dB SPL, with 10 dB pad (nominal)
- NOISE 11 dB SPL
- DYNAMIC RANGE (typical) 137 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 83 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
- SWITCHES High-pass filter;
- 10 dB pad (nominal)
- WEIGHT 6.0 oz (170 g)
- DIMENSIONS 4.55" (115.5 mm) long,
- 1.89" (48.0 mm) maximum diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE R6
Get your Audio Technica AE3000 today!
